Evropeyskaya Elektrotekhnica presents mobile plants for development of small and remote fields at the Oil and Gas Forum
Evropeyskaya Elektrotekhnica presents mobile plants for development of small and remote fields at the Oil and Gas Forum
February 19, 2019. Moscow — PJSC Evropeyskaya Elektrotekhnica (hereinafter — the "Company"), a leading company in the Russian engineering market, represented by its subsidiary ROG-Engineering LLC, took part in the Oil and Gas technical forum, which was held in Moscow on February 12, 2019.
Participants at the forum presented and discussed the modern principles and technologies of oil and gas field development, including those in remote and hard-to-reach areas. Nikolai Eremin, Professor of Gubkin Russian State University of Oil and Gas, gave an opening speech to the forum participants.
Management representatives from the following companies took part in the forum: Gazprom Dobycha Yamburg, Gazprom Neft, Lukoil-Engineering, Rosneft-Purneftegaz, Surgutneftegas, BaiTex (MOL Group), Skolkovo Energy Center, and Schlumberger. The ROG-Engineering team successfully held discussions and conducted negotiations with these companies.
Habir Kilmukhametov, General Director of ROG-Engineering LLC, presented a report in the New Construction Technologies, Domestic Production section entitled "Application of Mobile Complexes for Fast Launch of Small and Remote Fields". The equipment for implementation of the Early Oil projects was also presented in the report. Mr. Kilmukhametov's speech attracted audience attention as it dealt with some pressing issues in the industry; construction of infrastructure for the development of remote and small fields requires a large amount of funds and time. As a result, companies in this sector of industry make great efforts to find solutions to optimize these types of cost.
During the speech, Mr. Kilmukhametov answered a number of questions from audience members:
- What is the production capacity of the complexes offered by ROG-Engineering?
The production capacity of the units/modules produced and supplied by the company is determined by the physiochemical parameters of the reservoir fluid (oil, condensate, gas and water): gas-oil ratio and the required quality of the processed product at the outlet.
Specifically:
- mobile well-test and development units manufactured by the company ensure the unit capacity of the unit/module: flow rate of gas-liquid mixture at the inlet is up to 500 m3/day at a gas-oil ratio of up to 2,000 m3/t, at the design pressure of up to 6.3 MPa in the first separation stage, which allows to implement projects for early operation of wells/fields in order to obtain reliable data on their reserves;
- mobile preliminary water knock-out units manufactured by the company provide for a liquid output of 1,500 m3/day, water cut of 10% to 99%, gas output of 150,000 nm3/day, and a water content of no more than 5% in the oil at the outlet. Mobile preliminary water knock-out units are irreplaceable when early implementation of the system for maintaining reservoir pressure maintenance and injection to withdrawal ratio is needed;
- modular oil processing units provide for the following performance indicators: liquid output — 3,000 m3/day, oil output — 2,000 t/day, gas-oil ratio — no more than 1,000 m3/t (however, this indicator can be increased to 2,000 m3/t). The oil quality at the output is provided as per GOST R 51858-2002 “Oil. General Specifications” (with Amendments N 1, 2) of the quality product group according to the customer's request. When applied at early stages of field development, mobile preliminary water knock-out units help the operating companies to sell the products (mainly oil).
- What is the time frame for mobilization/demobilization of such units at the field?
When using units with skids, mobilization/demobilization takes up from 2 to 5 days, depending on the setup of the unit. When using units with sledges, mobilization/demobilization takes up from 5 to 15 days, also depending on the unit setup and its capacity.
- Is it possible to rent/lease equipment along with personnel?
Mobile units are available for leasing in the format convenient for the operator: equipment only or together with qualified operating and maintenance personnel.
Chief Technologist of ROG-Engineering LLC Damir Yunusov also answered questions from potential customers during the forum.
REFERENCE:
Tsentr Novykh Tekhnologiy (New Technologies Center) is the organizer of the Oil and Gas Forum. Forum 2019 was held with the support of Schlumberger.
Source: http://www.forumneftegaz.org
About ROG-Engineering
ROG-Engineering LLC (www.rogeng.ru) has been part of Group of Companies PJSC Evropeyskaya Elektrotekhnica since June 2018. PJSC Evropeyskaya Elektrotekhnica has a 95% stake in the Company's capital.
The Company develops, designs and produces a wide range of modern highly efficient modular process equipment for clients in Oil&Gas and petrochemical markets, including:
- Booster pump stations,
- Oil and gas treatment units in modular and container design,
- Mobile complexes for exploration and developing of drilling wells,
- Flares,
- Gas separation plants, as well as separate apparatus and units.
The Company's products have certificates of compliance with the requirements of the Eurasian Customs Union for Oil&Gas industry equipment.
The main customers of the Company are leading oil and gas companies in Russia and other countries: Rosneft, Lukoil, Gazprom Neft, Bashneft, Irkutsk Oil Company, and RussNeft.
One third of the Company's staff is comprised of research and engineering personnel. The Company's own design office ensures its leadership position in developing the innovative equipment in demand among Oil&Gas companies.
About the Group of Companies PJSC Evropeyskaya Elektrotekhnica
PJSC Evropeyskaya Elektrotekhnica (MOEX: EELT) provides comprehensive services in the sphere of creating energy and electric power supply systems, electric lighting systems, and low current systems at all types of facilities, as well as industrial electric heating systems.
The Company has been working in the electrical engineering market since 2004, and at present has its own engineering and production facilities. The Company is one of the leading distributors of electrical equipment in Russia, offering customers a wide range of products made both in Russia and abroad. Thanks to a well-organized and efficient logistics system, the Company is able to supply products (including oversize loads) all over Russia, including to hard-to-reach areas of the North, as well as Belarus, Kazakhstan, Turkmenistan, Kyrgyzstan and Uzbekistan. The company established its own production of transformer substations, electric switchboard equipment of any complexity (up to 6300 A), electric lighting systems and electric heating systems.
The Company implements projects in the oil and gas sector, electric power sector, nuclear industry, metal industry, mining industry, and manufacturing industry and at transport infrastructure facilities. Evropeyskaya Elektrotekhnica's customers include companies such as Rosneft, Gazprom, NOVATEK, LUKOIL, and Nizhnekamskneftekhim. The Company's projects include Power of Siberia, Yamal LNG, Smolensk NPP, Data Center of Sberbank of Russia, and the Domodedovo, Sheremetyevo, and Pulkovo airports, etc.
Since 2018, the Company has been producing highly efficient modular process equipment for clients in Oil&Gas and petrochemical markets at the site of its subsidiary ROG-Engineering, a research and production Company in Ufa (Republic of Bashkortostan, Russia).
Key financial indicators of PJSC Evropeyskaya Elektrotekhnica (IFRS):
|
|
Revenue (RUB billion) |
Profit for the period (RUB million) |
Total assets (RUB billion) |
|
9m 2018 |
2.6 |
224.3 |
1.47 |
|
2017 |
2.6 |
134.7 |
1.15 |
The number of employees is about 400 (as of June 30, 2018). Since September 2017, common shares of PJSC Evropeyskaya Elektrotekhnica are traded on the Moscow Exchange with trading code EELT.
In June 2018, the Company was named "Leader of Import Substitution" at the "Leader of Competitive Sales" annual national awards, in which 450 domestic suppliers from various industries took part.
Contacts:
PJSC Evropeyskaya Elektrotekhnica
Tel .: +7 (495) 640-93-48
Mailing address: Building 3, 1 Lyotchika Babushkina St., Moscow, 129344
Press contact Contact for investors and analysts
www.euroet.ru www.euroetpao.ru
For more information, please contact:
Stanislav Martyushev
Director for Corporate Communications and Investor Relations
PJSC Evropeyskaya Elektrotekhnica
Tel. +7 (495) 640-93-48, ext. 164
FOR REFERENCE:
ROG-Engineering LLC (www.rogeng.ru) performs the full range of services including:
- survey of existing Oil&Gas production facilities with presentation of engineering and process recommendations;
- engineering, design and construction of newly build projects;
- reconstruction and modernization of existing equipment and plants;
- design, fabrication and supply of complete process train equipment, modular process equipment, different types of pumping stations, mobile well-test and development units, flares and combustion systems, gas separator, gas treatment units and other types of Oil&Gas process equipment;
- design and implementation of hardware and software for Automated Process Control Systems;
- installation supervision;
- commissioning and start-up, designer's field supervision.
ROG-Engineering LLC designs and fabricates wide range modular process equipment with fully automated controls including:
- booster pumping stations BPS for any capacity;
- preliminary water knock-out units of vessel and tubular design with capacity up to 30 000 m3/day;
Perfomance indicators of preliminary water knock-out units:
• water cut of oil at inlet: up to 95% and greater;
• water cut of oil at outlet: 0.5% to 5%;
• content of petroleum products and solids in treated water: 5 to 50 mg/l.
- oil treatment plants with capacity of 0.2 to 4 million tons per year;
- produced water treatment units or separate vessels such as settlers of vessel or tubular design with volume of 10 to 200 m3 and with quality of water treatment of 5 to 50 mg/l;
- packaged well pad pumping station with capacity of 20 to 180 m3/hour;
- inlet separators for oil with high gas-oil ratio up to 2000 m3/m3;
- modernized separators and settlers with increased capacity of vessel and tubular designs;
- mobile well-test and development units;
- oil-well separation units;
- test separators for oil with normal and high gas-oil ratios up to 2000 m3/m3;
- associated petroleum gas treatment;
- gas treatment units;
- low pressure gas recovery units;
- gas dehydration units;
- combustion systems including flare KO drums, condensate drums, LP and HP flare risers, flare systems with tips for smokeless combustion;
- flare systems with demountable tips;
- flare systems with demountable flare stacks;
- horizontal flares for combustion LP and HP gases;
- horizontal flares for combustion of industrial waste gases;
- horizontal flares for combustion of liquid hydrocarbons and other combustible liquids;
- mobile filtration units;
- various types of pumping stations;
- auxiliary and utilities equipment including modular buildings for control rooms, motor control centers and others.
